Creating Universal Ghost Usb Boot Disk And Cd

 If you want to use Norton Ghost 2003 to create an image of a PC's primary partition you will find it has 2 serious limitations:
1- The USB support driver they use (from Iomega) can only be installed in USB1 or USB2 mode (not both), and it is not universal - it didn't recognize my external USB IBM mobile HD .
2- You can't create a Ghost bootable CD - only a floppy. How can you clone a newly bought laptop, most of which don't have a floppy anymore?
Here's How to:
1- create a Ghost floppy with USB support (1 or 2 - it won't matter later)
2- download 2 files kxlrw40an.exe and mhairu.zip
CODE

http://panasonic.co.jp/pcc/products/drive/cdrrw/kxlrw40an/driver/kxlrw40an.exe


CODE

http://www.stefan2000.com/darkehorse/PC/DOS/Drivers/USB/mhairu.zip


From the first file (Panasonic driver for a USB CDRW) you will need the file usbaspi.sys found under "F2H" sub directory after extraction of the downloaded archive. From the second archive you need di1000dd.sys
3- Copy these 2 files to the USB folder on the Ghost floppy, and delete any other files in that folder. Also delete the file guest.exe from the floppy's root.
4- And finaly:
edit the AUTOEXEC.BAT file - delete the line: guest.exe
and edit CONFIG.SYS - delete all entries and enter:
device=usb\USBASPI.SYS /v /e /o /u
device=usb\Di1000dd.SYS
LASTDRIVE = Z

That's it. You can now boot with this floppy and have full USB support so you can create the image on an external USB drive.

If you want to create a bootable CD you can use Nero:
Choose to create a "CD-ROM (boot)" from the wizard, under Boot tab leave the default "bootable logical drive: as A:\ . Insert your Ghost floppy to the drive, drag all the files from the floppy to "New compilation" and burn. You now have a bootable Ghost CD that even Symantec doesn't have..

PS if you need Norton Ghost 2003 get the full retail here:
CODE

http://soft.zmdinfo.ha.cn/system/Norton.Ghost.2003%E6%AD%A3%E5%BC%8F%E9%9B%B6%E5%94%AE%E7%89%88.iso.rar

Read More

Creating a Board aka Forum on your own PC !

 First of all you need Apache Server, PHP, MySQL and a Forum Script i.e. phpBB or Invision or vBulletin.

Download phpDev here

http://keihanna.dl.sourceforge.net/sourceforge/phpdev5/phpdev423.exe

and you get a bundle of all the things above.

exttract & install php dev. start the apache server,its 90% done.

upload the forum script to X:/phpdev/www/public

(x is your drive, usually C: )

now to access the forum through internet you will not know your IP address thru ipconfig command..

go to

http://www.whatismyip.com

see whats your IP address.

now go to

http://your ip address/public/your forum directory/install.php

thats it! 

Read More

Create One-click Shutdown And Reboot Shortcuts

Create One-Click Shutdown and Reboot Shortcuts:


First, create a shortcut on your desktop by right-clicking on the desktop, choosing New, and then choosing Shortcut. The Create Shortcut Wizard appears. In the box asking for the location of the shortcut, type shutdown. After you create the shortcut, double-clicking on it will shut down your PC.

But you can do much more with a shutdown shortcut than merely shut down your PC. You can add any combination of several switches to do extra duty, like this:

shutdown -r -t 01 -c "Rebooting your PC"
Double-clicking on that shortcut will reboot your PC after a one-second delay and display the message "Rebooting your PC." The shutdown command includes a variety of switches you can use to customize it. Table 1-3 lists all of them and describes their use.

I use this technique to create two shutdown shortcuts on my desktop—one for turning off my PC, and one for rebooting. Here are the ones I use:

shutdown -s -t 03 -c "Bye Bye m8!"
shutdown -r -t 03 -c "Ill be back m8 ;)!"

Switch
What it does

-s
Shuts down the PC.

-l
Logs off the current user.

-t nn
Indicates the duration of delay, in seconds, before performing the action.

-c "messagetext"
Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f
Forces any running applications to shut down.

-r
Reboots the PC.

Read More

Create Bootable XP SP integrated CD

 Slipstreaming Windows XP Service Pack 1a and Create Bootable CD

Slipstreaming a Service Pack, is the process to integrate the Service Pack into the installation so that with every new installation the Operating System and Service Pack are installed at the same time.

Slipstreaming is usually done on network shares on corporate systems. But with the advent of CD burners, it does actually make some sense for the home user or small business user to do the same.

Microsoft added the ability to Slipstream a Service Pack to Windows 2000 and Windows XP. It not only has the advantage that when you (re)install your OS, you don't have to apply the Service Pack later, also if you update any Windows component later, you'll be sure that you get the correct installation files if Windows needs any.


Slipstream Windows XP Service Pack 1a:
CODE
http://download.microsoft.com/download/5/4/f/54f8bcf8-bb4d-4613-8ee7-db69d01735ed/xpsp1a_en_x86.exe


Download the (full) "Network Install" of the Service Pack (English version [125 MB]), and save it to a directory (folder) on your hard drive (in my case D:\XP-SP1). Other languages can be downloaded from the Windows XP Web site.

Microsoft recently released Windows XP SP1a. The only difference is that this Service Pack does no longer include Microsoft's dated Java version. If you have already installed Windows XP SP1, there is no reason to install SP1a, but the "older" SP1 (with MS Java) is no longer available for download.

Next copy your Windows XP CD to your hard drive. Just create a folder (I used \XP-CD), and copy all the contents of your Windows XP CD in that folder.

Now create a folder to hold the Service Pack 1a (SP1a) files you are about to extract. I named it \XP-SP1. Next, open a Command Prompt (Start > Run > cmd), and go to the folder where you downloaded SP1a (cd \foldername). Type the command: servicepack filename -x. A small window will appear, and you need to point it to the folder where you want to extract the SP1 files. Click Ok to start extracting the SP1a files.

Once the SP1a files are extracted, change to the update folder of the SP1a files (cd update), and type the following command: update /s:path to WinXP CD files. In my example the command is update /s:D:\XP-CD).

Windows XP Update will do its thing:

When ready, you should get a confirmation. Windows XP Service Pack 1a has now been Slipstreamed into your original Windows XP files.

It is also possible to add the Windows XP Rollup 1 Update. For instructions, please read Adding Windows XP Rollup 1 Hotfix.


Creating a Bootable CD
For this part I used ISO Buster
CODE
http://www.smart-projects.net/isobuster/

and Nero Burning.

Start to extract the boot loader from the original Windows XP CD. Using ISO Buster, select the "folder" Bootable CD, and right-click Microsoft Corporation.img. From the menu choose Extract Microsoft Corporation.img, and extract it to the folder on your hard drive where you have your Windows XP files (D:\XP-CD in my case).

Next, start Nero Burning ROM, and choose CD-ROM (Boot) in the New Compilation window. On the Boot tab, select Image file under Source of boot image data, and browse to the location of the Microsoft Corporation.img file. Also enable Expert Settings, choosing No Emulation, and changing the Number of loaded sectors to 4 (otherwise it won't boot!)


If you have an older version of Nero you won't have the option Do Not Add ";1" ISO file version extention under Relax ISO Restrictions. You won't be able to boot your new CD, so update Nero!
You can configure the Label tab to your liking, I would however recommend that you keep the Volume Label the same as on your original Windows XP CD.

Next press New, and drag & drop the files and folders from your Windows XP hard drive location into Nero.

Next, burn your new CD.

You now have a Bootable, Slipstreamed Windows XP Service Pack 1a CD! 

Read More

How to create a bootable Windows XP SP1 CD (Nero):

How to create a bootable Windows XP SP1 CD (Nero):
Step 1

Create 3 folders - C:\WINXPSP1, C:\SP1106 and C:\XPBOOT

Step 2

Copy the entire Windows XP CD into folder C:\WINXPSP1

Step 3

You will have to download the SP1 Update, which is 133MB.
Rename the Service Pack file to XP-SP1.EXE
Extract the Service Pack from the Run Dialog using the command:
C:\XP-SP1.EXE -U -X:C:\SP1106

Step 4

Open Start/Run... and type the command:
C:\SP1106\update\update.exe -s:C:\WINXPSP1

Click OK

Folder C:\WINXPSP1 contains: Windows XP SP1



How to Create a Windows XP SP1 CD Bootable

Step 1

Download xpboot.zip
Code:
Code:
http://thro.port5.com/xpboot.zip

( no download manager !! )

Extract xpboot.zip file (xpboot.bin) in to the folder C:\XPBOOT

Step 2

Start Nero - Burning Rom.
Select File > New... from the menu.
1.) Select CD-ROM (Boot)
2.) Select Image file from Source of boot image data
3.) Set Kind of emulation: to No Emulation
4.) Set Load segment of sectors (hex!): to 07C0
5.) Set Number of loaded sectors: to 4
6.) Press the Browse... button



Step 3

Select All Files (*.*) from File of type:
Locate boot.bin in the folder C:\XPBOOT

Step 4

Click ISO tab
Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)
Set Format to Mode 1
Set Character Set to ISO 9660
Check all Relax ISO Restrictions




Step 5

Click Label Tab
Select ISO9660 from the drop down box.
Enter the Volume Label as WB2PFRE_EN
Enter the System Identifier as WB2PFRE_EN
Enter the Volume Set as WB2PFRE_EN
Enter the Publisher as MICROSOFT CORPORATION
Enter the Data Preparer as MICROSOFT CORPORATION
Enter the Application as WB2PFRE_EN

* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN
* For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN

Step 6

Click Burn tab
Check Write
Check Finalize CD (No further writing possible!)
Set Write Method to Disk-At-Once

Press New button

Step 7

Locate the folder C:\WINXPSP1
Select everything in the folder and drag it to the ISO compilation panel.
Click the Write CD Dialog button.

Press Write

You're done.

Read More

Create An Ftp Server On Your Pc With Serv-u

Create An Ftp Server On Your Pc With Serv-u


Requirements:
Serv-U
No-IP.com Website

Quote:
Step 1. Getting a static IP address.
Get a static address for your FTP server. You will want to do this as opposed to using your IP address for several reasons. First, it’s easier keeping up-to-date. Imagine having to change all of your setting every time your IP changed. With No-IP, the No-IP service runs in background on your computer and updates your current IP address with your FTP server’s URL (for example, you get ftp://rkchoolie.serveftp.com). Second reason, you don’t want your IP address posted out there for everyone to see.

1. Go to www.No-IP.com to create a new user account.
2. Fill in the information that is required and the click Register button.
3. Your account has now been created and your account password has been emailed to you.
4. Check your email mailbox and wait for the mail that contains your password
5. Go back to www.No-IP.com and type your email address and password to login to your account.
6. Once in your account, click on Add a host in the left menu
7. Type in the Hostname you want (example: rkchoolie) and pick a Domain from the list (example: ftpserve.com)
8. Check Allow Wildcards and click the Submit button
9. You now have your static address (example: rkchoolie.serveftp.com)
10. Click on your OS link in the Dyn-Update Client in the bottom right menu and follow links to download the client
11. Once downloaded, install the software and type in your email address and password when asked.
12. Finally tick the checkbox near your static address.

You now have a static web address .


Quote:
Step 2. Installing and setting the FTP server
1. Install Serv-U 4.0.
2. Start Serv-U and use the wizard to setup your ftp.
3. Click next until you're asked for an IP address, leave it blank and then click next.
4. Type the domain name you've just registered above (example: preacher.serveftp.com) in the domain name field and then click Next.
5. You are asked if you want to allow anonymous access, select No and then click next.
6. You are then asked to create a named account, check yes and then click next.
7. Type in the user name you wish for this account (example: Harrie) and click next.
8. Type a password for this account (example: $p3c1aL). For security reasons, try to create a password with some letters, numbers and special characters. Then click next.
9. You will then be asked for the Home directory of the account you just created. Select the directory and then click next.
10. Select yes to lock this account to the Home directory. You want to do this so that the user can not go any further up that his home directory. Click next.
11. The account is now set so click finish.

Quote:
Step 3. Configuring user accounts
1. In the left tree-menu, select the account you've just created and then click on the General tab.
2. Check Hide ‘Hidden’ Files.
3. Check Allow only and enter the number one in the box.
4. Set the Max. download speed to what ever you want. If this is an account that many will be using, set it low to save on your bandwidth. I usually have mine set between 10 – 20. If you leave it blank, users will be able to download from you at full bandwidth.
5. Set the Max no. of users to how many you want to be able to log on at one time. This depends on your connection speed but try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6. Now, click on the Dir Access tab.
7. You should see the home folder in there. Highlight it and make your permissions.
8. If you only want users to be able to download check only Read, List, & Inherit.
9. If you want users to be able to upload, but to only one particular folder but not download, click the add button and then select that folder. Now highlight the folder and set these permissions on that folder. Check Write, Append, List, Create, & Inherit. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this special upload folder to be list first, before the home folder.
10. If there is a folder that you don’t want anyone to have access to, but it is inside the home folder, then click the add button and then select that folder. Now highlight the folder and make sure that all checkboxes are left. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this no access folder to be listed at the very top.
11. There are many other different sets of permissions you can play with. I just covered your basics.
12. Your server is now set!
13. Try logging on with the username and password and see if it works. 

Read More

Create A Personal Screen Saver In Win Xp!

This isnt a tweak, but a great little feature! For a great way to put your digital photos to work, try creating a slide show presentation for use as a screen saver. Here's how:

1. Right-click an empty spot on your desktop and then click Properties.

2. Click the Screen Saver tab.

3. In the Screen saver list, click My Pictures Slideshow.

4. Click Settings to make any adjustments, such as how often the pictures should change, what size they should be, and whether you'll use transition effects between pictures, and then click OK.

Now your screen saver is a random display of the pictures taken from your My Pictures folder.

Read More

Create A Huge File

Create A Huge File

You can create a file of any size using nothing more than what's supplied with Windows. Start by converting the desired file size into hexadecimal notation. You can use the Windows Calculator in Scientific mode do to this. Suppose you want a file of 1 million bytes. Enter 1000000 in the calculator and click on the Hex option to convert it (1 million in hex is F4240.) Pad the result with zeroes at the left until the file size reaches eight digits—000F4240.

Now open a command prompt window. In Windows 95, 98, or Me, you can do this by entering COMMAND in the Start menu's Run dialog; in Windows NT 4.0, 2000, or XP enter CMD instead. Enter the command DEBUG BIGFILE.DAT and ignore the File not found message. Type RCX and press Enter. Debug will display a colon prompt. Enter the last four digits of the hexadecimal number you calculated (4240, in our example). Type RBX and press Enter, then enter the first four digits of the hexadecimal size (000F, in our example). Enter W for Write and Q for Quit. You've just created a 1-million-byte file using Debug. Of course you can create a file of any desired size using the same technique.

Read More

Configuring Crap Software Pro

Configuring Crap Software Pro
--------------------------------------
Configuring The Standard Settings

Your first configuration should be this of Crap Software should be like this----

Launch Crap Software Pro and click to highlight the "Overview"
tab on the left hand side . In the pane that appears on the right
hand side click the "Preferences" tab and in the section "Check for updates" check "Manually".

In the "General" section you can also configure Crap Software to load at
start up which is advisable because this software is your first line
defence against uninvited invasion of your computer by a whole
gamult of virii, spyware, adware and bots! Virus checking software
does have its place but remember that prevention is always better
than a cure!

Crap Software Pro's program control is automatically configured.
When you run it for the first time it will ask on behalf of programs
installed on your system for permission to access the Internet.
Your Browser will be the first to request - just tick the "Yes"
box and the "Remember this setting" box and Crap Software will
always allow your browser access automatically.

Unless you use online databases etc., there should be no
reason for any application other than a browser, email client, ftp client,
streaming media player or a download manager to gain access to the Internet.

So consider what type of program it is that needs Internet access
before giving Crap Software permission to allow it. If it is just a driver file
(.DLL) that requests Internet access, always search Windows to try
and identify it. Many seudo-virii such as AdWare and sub class
seven Trojans access the Internet from your system using .dll files.
----------------------------------------------

Configuring The Advanced Settings

If you are not on a LAN (connected to another computer in a network)
you can use this guide to give your firewall some real muscle:

Launch Crap Software Pro and click to highlight the "Firewall" tab on
the left hand side . In the pane that appears on the right hand side
in the section "Internet Zone Security" set the slider control to "High"
Then click the "Custom" button in the same section.
The next settings page is divided into two sections with tabs Internet
Zone and Trusted Zone at the top of the page.

Under the Internet Zone tab there is a list of settings that can
be accessed by scrolling.

At the top is the high security settings and the only thing that should
check from there is "allow broadcast/multicast".
The rest should be unchecked

Scroll down until you get to the medium security settings area.
Check all the boxes in this section until you get to "Block Incomming
UDP Ports". When you check that you will be asked to supply
a list of ports, and in the field at the bottom of the page enter
1-65535

Then go back to the list and check the box alongside "Block
Outgoing UDP Ports" and at the bottom of the page enter
1-19, 22-79, 82-7999, 8082-65535

Repeat this proceedure for the following settings
"Block Incomming TCP Ports": 1-65535
"Block Outgoing TCP Ports": 1-19, 22-79, 82-7999, 8082-65535
Then click "Apply", "Ok" at the bottom of the page.

Back in the right hand "Firewall" pane go next to the yellow
"Trusted Zone Security" section and set it to "high" with the slider.
Click "Custom" and repeat the ABOVE proceedure this time choosing
the *Trusted Zone* tab at the top of the settings page.

These settings will stop all incoming packets at ports 1-65535
and also block all pings, trojans etc. These settings will also stop all
spyware or applications from phoning home from your drive without your knowledge!

Read More

Cracking Zip Password Files

Cracking Zip Password Files

Tut On Cracking Zip Password Files..
What is FZC? FZC is a program that cracks zip files (zip is a method of compressing multiple files into one smaller file) that are password-protected (which means you're gonna need a password to open the zip file and extract files out of it). You can get it anywhere - just use a search engine such as altavista.com.
FZC uses multiple methods of cracking - bruteforce (guessing passwords systematically until the program gets it) or wordlist attacks (otherwise known as dictionary attacks. Instead of just guessing passwords systematically, the program takes passwords out of a "wordlist", which is a text file that contains possible passwords. You can get lots of wordlists at www.theargon.com.).
FZC can be used in order to achieve two different goals: you can either use it to recover a lost zip password which you used to remember but somehow forgot, or to crack zip passwords which you're not supposed to have. So like every tool, this one can be used for good and for evil.
The first thing I want to say is that reading this tutorial... is the easy way to learn how to use this program, but after reading this part of how to use the FZC you should go and check the texts that come with that program and read them all. You are also going to see the phrase "check name.txt" often in this text. These files should be in FZC's directory. They contain more information about FZC.
FZC is a good password recovery tool, because it's very fast and also support resuming so you don't have to keep the computer turned on until you get the password, like it used to be some years ago with older cracking programs. You would probably always get the password unless the password is longer than 32 chars (a char is a character, which can be anything - a number, a lowercase or undercase letter or a symbol such as ! or &) because 32 chars is the maximum value that FZC will accept, but it doesn't really matter, because in order to bruteforce a password with 32 chars you'll need to be at least immortal..heehhe.. to see the time that FZC takes with bruteforce just open the Bforce.txt file, which contains such information.
FZC supports brute-force attacks, as well as wordlist attacks. While brute-force attacks don't require you to have anything, wordlist attacks require you to have wordlists, which you can get from www.theargon.com. There are wordlists in various languages, various topics or just miscellaneous wordlists. The bigger the wordlist is, the more chances you have to crack the password.
Now that you have a good wordlist, just get FZC working on the locked zip file, grab a drink, lie down and wait... and wait... and wait...and have good thoughts like "In wordlist mode I'm gonna get the password in minutes" or something like this... you start doing all this and remember "Hey this guy started with all this bullshit and didn't say how I can start a wordlist attack!..." So please wait just a little more, read this tutorial 'till the end and you can do all this "bullshit".

We need to keep in mind that are some people might choose some really weird passwords (for example: 'e8t7@$^%*gfh), which are harder to crack and are certainly impossible to crack (unless you have some weird wordlist). If you have a bad luck and you got such a file, having a 200MB list won't help you anymore. Instead, you'll have to use a different type of attack. If you are a person that gives up at the first sign of failure, stop being like that or you won't get anywhere. What you need to do in such a situation is to put aside your sweet xxx MB's list and start using the Brute Force attack.
If you have some sort of a really fast and new computer and you're afraid that you won't be able to use your computer's power to the fullest because the zip cracker doesn't support this kind of technology, it's your lucky day! FZC has multiple settings for all sorts of hardware, and will automatically select the best method.

Now that we've gone through all the theoretical stuff, let's get to the actual commands.


--------------------------------------------------------------------------------
Bruteforce
--------------------------------------------------------------------------------


The command line you'll need to use for using brute force is:

fzc -mb -nzFile.zip -lChr Lenght -cType of chars

Now if you read the bforce.txt that comes with fzc you'll find the description of how works Chr Lenght and the Type of chars, but hey, I'm gonna explain this too. Why not, right?... (but remember look at the bforce.txt too)

For Chr Lenght you can use 4 kind of switches...

-> You can use range -> 4-6 :it would brute force from 4 Chr passwors to 6 chr passwords
-> You can use just one lenght -> 5 :it would just brute force using passwords with 5 chars
-> You can use also the all number -> 0 :it would start brute forcing from passwords with lenght 0 to lenght 32, even if you are crazy i don't think that you would do this.... if you are thinking in doing this get a live...
-> You can use the + sign with a number -> 3+ :in this case it would brute force from passwords with lenght 3 to passwords with 32 chars of lenght, almost like the last option...

For the Type of chars we have 5 switches they are:

-> a for using lowercase letters
-> A for using uppercase letters
-> ! for using simbols (check the Bforce.txt if you want to see what simbols)
-> s for using space
-> 1 for using numbers


Example:
If you want to find a password with lowercase and numbers by brute force you would just do something like:

fzc -mb -nzTest.zip -l4-7 -ca1

This would try all combinations from passwords with 4 chars of lenght till 7 chars, but just using numbers and lowercase.

*****
hint
*****

You should never start the first brute force attack to a file using all the chars switches, first just try lowercase, then uppercase, then uppercase with number then lowercase with numbers, just do like this because you can get lucky and find the password much faster, if this doesn't work just prepare your brain and start with a brute force that would take a lot of time. With a combination like lowercase, uppercase, special chars and numbers.


--------------------------------------------------------------------------------
Wordlis
--------------------------------------------------------------------------------

Like I said in the bottom and like you should be thinking now, the wordlist is the most powerfull mode in this program. Using this mode, you can choose between 3 modes, where each one do some changes to the text that is in the wordlist, I'm not going to say what each mode does to the words, for knowing that just check the file wlist.txt, the only thing I'm going to tell you is that the best mode to get passwords is mode 3, but it takes longer time too.
To start a wordlist attak you'll do something like.

fzc -mwMode number -nzFile.zip -nwWordlist

Where:

Mode number is 1, 2 or 3 just check wlist.txt to see the changes in each mode.
File.zip is the filename and Wordlist is the name of the wordlist that you want to use. Remember that if the file or the wordlist isn't in the same directory of FZC you'll need to give the all path.

You can add other switches to that line like -fLine where you define in which line will FZC start reading, and the -lChar Length where it will just be read the words in that char length, the switche works like in bruteforce mode.
So if you something like

fzc -mw1 -nztest.zip -nwMywordlist.txt -f50 -l9+

FZC would just start reading at line 50 and would just read with length >= to 9.

Example:

If you want to crack a file called myfile.zip using the "theargonlistserver1.txt" wordlist, selecting mode 3, and you wanted FZC to start reading at line 50 you would do:

fzc -mw3 -nzmyfile.zip -nwtheargonlistserver1.txt -f50





--------------------------------------------------------------------------------
Resuming
--------------------------------------------------------------------------------

Other good feature in FZC is that FZC supports resuming. If you need to shutdown your computer and FZC is running you just need to press the ESC key, and fzc will stop. Now if you are using a brute force attack the current status will be saved in a file called resume.fzc but if you are using a wordlist it will say to you in what line it ended (you can find the line in the file fzc.log too).
To resume the bruteforce attack you just need to do:

fzc -mr

And the bruteforce attack will start from the place where it stopped when you pressed the ESC key.
But if you want to resume a wordlist attack you'll need to start a new wordlist attack, saying where it's gonna start. So if you ended the attack to the file.zip in line 100 using wordlist.txt in mode 3 to resume you'll type

fzc -mw3 -nzfile.zip -nwwordlist.txt -f100

Doing this FZC would start in line 100, since the others 99 lines where already checked in an earlier FZC session.


Well, it looks like I covered most of what you need to know. I certainly hope it helped you... don't forget to read the files that come with the program

Read More

Cracking Bios, use the following code

Here is the best way to crack the bios password in win 95/98:

Follow the steps below:

1) Boot up windows.
2) go to dos-prompt or go to command prompt directly from the windows start up menu.

3) type the command at the prompt: "debug" (without quotes ninja.gif )
4) type the following lines now exactly as given.......
o 70 10
o 71 20
quit
exit

4) exit from the dos prompt and restart the machine


password protection gone!!!!!!!!!!!!! biggrin.gif

EnjoYYYYYYYYYY

PS: I tested this in Award Bios........
There seems to be some issue regarding display drivers on some machines if this is used. Just reinstall the drivers, Everything will be fine...........

I have not found any other trouble if the codes are used.

To be on safe side, just back up your data..........


The use of this code is entirely at ur risk.......... It worked fine for me..........

Read More

COPY X BOX GAMES!

 BURNING X-BOX & GAMECUBE GAMES USEING CDRWIN
------------------------------------------------------
1) Insert your original in your CD-ROM.
2) Open CDRWin (or any other image extractor) to make an iso image of the game
on your hard disc. Click on 'Extract Disc/Tracks/Sectors'
3) Here are the settings which work for me (!):
Disc Image/Cue sheet
File-Format: Automatic
Reading-Options:
RAW, CD+G, CD-TEXT and MCN/USRC all Unchecked
Error Recovery: Ignore
Jitter Correction: Auto
Subcode Analyses: Fixed
Data-Speed: MAX
Read Retry Count: 10
Audio Speed: MAX
Subcode Threshold: 900
There are a lot of reports, that Raw reading also works, but I had problems with it enabled.
4) Click on 'Start'
--------------------------------------------------------------------------------
RECORDING TO A DISC
--------------------------------------------------------------------------------
1) Install Fireburner

2) Double click on the Cue File For The Game
3) Right Click And select burn To CD
That?s all there is record DAO, and you can try to burn it fast at 2X
Using PNY Black Diamond CDR'

Read More

Converting Disk Partition to NTFS

Converting to NTFS

Your hard drive must be formatted with a file system such as FAT, FAT32 or NTFS so that Windows can be installed on to it. This system determines how files are named, organised and stored on the drive. If you’re not using it already, NTFS (New Technology File System) is recommended for Windows XP because of the additional functionality it offers. If your PC came with Windows XP pre-installed then there’s a chance that you’re already using NTFS. If you’ve upgraded from Windows 98 or Windows Me you may still be using FAT or FAT 32. The option to change over to NTFS would have been available during the upgrade process. Don’t worry if you skipped this as it’s possible to convert at any time from within Windows XP without losing any data.

The recommended option
There are a number of features in Windows XP that will only work if the NTFS file system is present, which is why it’s suggested you make use of it. File and folder permissions, encryption and privacy options are just some of those you’ll be able to access. In particular, those of you who have set up user accounts will find NTFS invaluable. For instance, if you continue to use FAT or FAT32 anyone with physical access to the drive will be able to access the files and folders that are stored there. However, with NTFS you’ll be able to use a level of encryption (Professional Edition only) that will enable you to protect your data.

You’ll also find NTFS more reliable in that it’s more able to recover from disk errors than its FAT or FAT32 counterparts. A log of all disk activity is kept so should a crash occur, Windows XP can use this information to repair the file system when your PC boots up again. To find out what file system you’re using, open My Computer, right-click your main hard drive and choose Properties. Take a look at the General tab to see confirmation of the file system that’s in use.

Convert now
You can use the convert tool in Windows XP to change the file system on your hard disk from FAT or FAT32 to NTFS. The whole process is safe and your existing data won’t be destroyed. To begin, click Start -> Run, type cmd and press [Return]. At the command prompt type convert c: /fs:ntfs and press [Return] (where ‘c’ is the letter of the drive you’re converting). When you try and run the convert utility, it’s likely that Windows XP will be using your paging file so the process won’t be completed immediately. Therefore, you’ll see a brief message on screen informing you that the conversion will take place instead the next time Windows starts up. Having restarted, the Check Disk utility will run, the conversion will be performed automatically and you may find that your PC will reboot twice more.

The benefits
With your drive now running NTFS, it’s time to take advantage of the new options that are available. Having created a number of different user accounts you can now control the level of access that’s granted to individual users. For example, there are going to be certain files and folders that you’ll want some users to be able to access but not others. If you have Windows XP Professional Edition you can do this immediately.

Right-click any file or folder, choose Properties and select the Security tab. A dialog will be displayed showing the names of all your users. Alongside will be two columns which enable you to select levels of access for each of them, the permissions include Full Control, Modify, Read and Write. You can then check the appropriate box to determine whether or not to Allow or Deny a particular permission. For Windows XP Home Edition users, the Security tab won’t be immediately available. To access this option you’ll need to restart your PC, pressing [F8] until a menu appears. Next select Safe Mode and wait for Windows XP to start up. You can then set your options in the same way.

Another feature is NTFS compression. It’s quick and seamless as your file or folder is decompressed automatically when you access it. (Don’t confuse this with a Zip compression utility where the files need to be extracted before they can be accessed.) Although you may have used NTFS compression on a file or folder, there’s no way of telling just by looking at it. To remedy this, open My Computer, click Tools -> Folder Options and select the View tab. Under Advanced settings, scroll down and check the option ‘Show encrypted or compressed NTFS files in color’, then click Apply and OK. Take a look at your compressed items in My Computer and you’ll see the text label has changed from black to blue. Something else that’s exclusive to Professional Edition users is the Encrypting File System (EFS). You can use this to protect your important data so that no one else can read it. Your encrypted files and folders will only be accessible when you have logged into your user account successfully.

Read More

Converting Movies To Psp Format

Converting Movies To Psp Format.

Hey again, this is a real quick guide for anyone interested to get a movie onto there PSP without all the fluff i have seen elsewhere. I just watched Africa the Serengeti on my PSP and heres is the lowdown.

Movie - approx 40 minutes - dvd
Saved to hard drive - 2.6GIG - using DVD Decryptor (free program) try google
Transfered to avi format - 377MB- using Super DVD Ripper (9 FREE trial uses) then you must buy
Transfered to MP4 - 37MB - using the (basically free) Image convertor 2

Average movie breakdown - using above as a guide only.
so im guessing the average movie may be 4.5gig for example
saved to 800MB
CONVERTED TO 70-80MB

Ok use DVD decryptor to save the movie to your hard drive eg. C:\africa (it will save it for you as described)
When completed find the folder c:\africa on your computer and find the vob file in that folder - generally the largest one and right click and play it with your dvd program to see what part it is. If its the correct movie part you now know thats the one you need.

Once you have located the vob file you want to transfer open DVD Ripper and go to wizard icon. There you will see an icon of VOB to AVI button. Click it and then it will ask to locate the file. Locate the file and click it. It will SCAN THE FILE(just wait till that finishes) a parameter box opens next and just click the arrow. It then askes to choose output file, click the file icon and locate the correct fob file. It then askes for file compression - choose microsoft windows media and then click ok Then press the start button. It will now convert the vob into avi format.
(there are also other opions ie;dvd to avi etc) I have only used the vob to avi for this test.

After DVD ripper has transferred the file it will save it to the same folder as the original move was in eg: c:\africa\viteots. Open the file and you will now see an AVI icon containing the movie.

Make sure you PSP is on and in usb mode then Open Image convertor 2 and press on movie / add to list. For this example i click on C:drive the found the folder Africa and opened it and there was my converted AVI file. Click the file press ok and it will be transfered to your PSP for viewing pleasure.

*****Note**** i only converted one VOB file as thatS all there was for this particular movie. If you have more then one vob file you may need to try the dvd to avi when you rip. This is just a guide i worked out to compress dvd into the smallest possible file so you can get value out of a 512 card.

QUOTE
http://www.crazyhatsoftware.com/ImageConverter2.1.exe

Image Converter 2.1 JAP translated to ENG.

Read More

Convert To Basic And Dynamic Disks In Windows Xp

Windows XP Professional supports two types of disk storage: basic and dynamic. Basic disk storage uses partition-oriented disks. A basic disk contains basic volumes (primary partitions, extended partitions, and logical drives).

Dynamic disk storage uses volume-oriented disks, and includes features that basic disks do not, such as the ability to create volumes that span multiple disks (spanned and striped volumes).

General Notes
Before you change a basic disk to a dynamic disk, note these items:


You must have at least 1 megabyte (MB) of free space on any master boot record (MBR) disk that you want to convert. This space is automatically reserved when the partition or volume is created in Microsoft Windows 2000 or Windows XP Professional. However, it may not be available on partitions or volumes that are created in other operating systems.

When you convert to a dynamic disk, the existing partitions or logical drives on the basic disk are converted to simple volumes on the dynamic disk.

After you convert to a dynamic disk, the dynamic volumes cannot be changed back to partitions. You must first delete all dynamic volumes on the disk, and then convert the dynamic disk back to a basic disk. If you want to keep your data, you must first back up or move the data to another volume.

After you convert to a dynamic disk, local access to the dynamic disk is limited to Windows XP Professional and Windows 2000.

If your disk contains multiple installations of Windows XP Professional or Windows 2000, do not convert to a dynamic disk. The conversion operation removes partition entries for all partitions on the disk with the exception of the system and boot volumes for the current operating system.

Dynamic disks are not supported on portable computers or Microsoft Windows XP Home Edition.

Before you change a dynamic disk back to a basic disk, note that all existing volumes must be deleted from the disk before you can convert it back to a basic disk. If you want to keep your data, back up the data, or move your data to another volume.

How to Convert a Basic Disk to a Dynamic Disk

To convert a basic disk to a dynamic disk:

1) Log on as Administrator or as a member of the Administrators group.

2) Click Start, and then click Control Panel.

3) Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.

4) In the left pane, click Disk Management.

5) In the lower-right pane, right-click the basic disk that you want to convert, and then click Convert to Dynamic Disk.

NOTE:You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 0.

6) Select the check box that is next to the disk that you want to convert (if it is not already selected), and then clickOK.

7) Click Details if you want to view the list of volumes in the disk.

8) Click Convert.

9) Click Yes when you are prompted to convert, and then click OK.

How to Convert a Dynamic Disk to a Basic Disk

To change a dynamic disk back to a basic disk:

1) Back up all the data on all the volumes on the disk you want to convert to a basic disk.

2) Log on as Administrator or as a member of the Administrators group.

3) Click Start, and then click Control Panel.

4) Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.

5) In the left pane, click Disk Management.

6) Right-click a volume on the dynamic disk that you want to change to a basic disk, and then click Delete Volume.

7) Click Yes when you are prompted to delete the volume.

8) Repeat steps 4 and 5 for each volume on the dynamic disk.

9) After you have deleted all the volumes on the dynamic disk, right-click the dynamic disk that you want to change to a basic disk, and then click Convert to Basic Disk.

NOTE:You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 1.

Read More